Arizona Shower Doors protected with Clear-Fusion Pro™ Nano-Coating are guaranteed to remain more water repellent than untreated glass for 10-years as long as basic manufacturer maintenance recommendations are followed and no harsh or abrasive cleaners are used. Those basic maintenance recommendations are included with all protected shower door and are also available from Arizona Shower Door (ASD) or Diamon-Fusion International, Inc. (DFI).
Diamon-Fusion International's Clear-Fusion Pro™ nano-coating chemically bonds to the glass and creates a protective nanofilm that when applied by the trained professionals at Arizona Shower Door, is guaranteed not to haze, chip, crack, peel, or yellow for the lifetime of the glass. In the event of a covered product failure, Arizona Shower Door will provide materials necessary for retreatment. ASD's liability is limited to the cost of replacing DFI chemical materials and will in no way extend to indirect, incidental or consequential damages incurred in relationship to this product.
Clear-Fusion Pro™ maintenance products available from Arizona Shower Door will assure a clear and easy to clean surface for many years even after this warranty has expired. Ask your Arizona Shower Door reseller about the Consumer Maintenance Kit and Express Care Kit, both are easy and complete systems for following manufacturer recommended maintenance and more.
To Keep Your Warranty In Force
Protecting your Arizona Shower Door with Clear-Fusion Pro™ is a wise investment that will reduce the time and effort you spend cleaning. While Clear-Fusion Pro™ dramatically reduces the cleaning requirements of your shower glass, just like the non-stick coating in a frying pan, you do have to perform some basic cleaning and maintenance to ensure on-going performance.
Following the maintenance instructions below will ensure many years of satisfaction. Use of the DFI Consumer Maintenance Kit or DFI Express Care Kit can extend the life of Clear-Fusion Pro™ coating and the glass it protects well beyond your 10-Year Warranty.
Basic Maintenance Recommendations to maximize the life and benefit of your DFI treated surface:
After each use: Rinse or spray the surface with cool (for best results), clean water. Wipe it dry or let the water drain off and pat dry the few remaining droplets.
Once a week: Wet the surface and use a nylon body puff and go over the wet surface, rubbing in a circular motion. You should feel places that are "sticky" going back to slick again. Then rinse or spray the surface with cool, clean water just as you do after each use. Wipe it dry or let the water drain off, and pat dry the few remaining droplets.
If you haven't followed the Basic Maintenance Recommendations:
A DFI Consumer Maintenance Kit can be used to restore your surface. This kit is available directly from Arizona Shower Door or resellers of their products nationwide. For your convenience, the DFI Consumer Maintenance Kit and DFI Express Care Kit include everything you need to satisfy the Basic Maintenance Recommendations and more:
- Nylon Cleaning Puff - To wipe down the treated surface on a regular basis.
- White Scrubber Pad - For use if the basic maintenance has not been performed.
- DFI Restoration Powder - Also for use when the basic maintenance has not been performed.
- DFI Revitalizer - This is used to bring back your DFI treated surfaces to "just applied" condition. It can also be used as a basic protective treatment for anodized aluminum frames and hardware, and vinyls and plastics.
- Microfiber Towel - Used for polishing the glass after applying the Revitalizer.
The DFI Consumer Maintenance Kit contains everything above including 16 ounces of Revitalizer and the DFI Express Care Kit simply has smaller quantities of Revitalizer and Restoration Powder and can be purchased from one of our six branch locations . Both can be ordered directly from Arizona Shower Door by calling us at one of our six branches.
Toll Free:
• Phoenix, AZ: 1-(800)-255-1901
• Denver, CO: 1-(866)-574-1766
• Chicago, IL: 1-(800)-861-6120
• Las Vegas, NV: 1-(866)-800-2011
• Medford, OR: 1-(866)-773-7905
• Salt Lake City, UT: 1-(877)-402-5007
